August 20, 2021 – Micro MKT Co., Ltd.

Speedometer for RBE Railway

August 20, 2021October 7, 2021 admin

Part Number – MKT-ERU-3

Power Supply Voltage	: 18V to 36V DC from RBE Railway Bus build in Battery.
Power	: Less than 20 Watts
Speed Dial	: 0 – 120 Km/h
Speed Measurement	: Magnetic pick-up (RBE25 )
	: Speed Generator (RBE50 ,RBE30 )
MKT SPEED Transmitter Unit (MKT-TSU-1)
Recording System	: Using SD and Industrial grade flash.
Resolution of Recording	: Long-Term Memory can store minimum
	: (180 Days travel at resolution of 20 seconds )
	: Short-Term Memory can store Data of minimum
	: (72 Hours travel at resolution of 1 second.)
Display	: 128×64 Graphic Display OLED
Display parameters	: Time, Date, Distance, System status, etc.
Temperature range	: -5 degree C to +80 degree Centigrade
Data Entry Keyboard	: Through 16 Key setting any parameter.
Wheel diameter setting	: Adjustable through keypad 640mm – 1220mm.
Digital Input	: 5 Input of 24V DC
Digital Output	: Customer requirement
Downloading of Recorded	: Data can be download to using USB Thumb Drive.
	: Data
Analysis Software	: MEDHA MSW 918 Version 5.1 compatible ( USE MRT91 )

PIC Development Board V.2.0

August 20, 2021September 20, 2021 admin

Product Details

Name : PIC Development Board V.2.0
Model Number : MKT Dev V.2.0
Usage : Developer , Student , Production
Power Type : USB Power , ON board 3.3V regulator
Display : 4 Digit 7 segment
communication : CH340G usb to TTL converter
Analog : Variable resistor for AN0 and AN2
Digital : Yellow LED 7 Nos , 4×4 keypad compatible pin
LCD : 16×2 LCD , 20×4 LCD compatible pin
Sensor : Ultersonic sensor (HC SR04) compatible pin
Switch : SMD push button 3 Nos
Motor Control : Full Bridge, Half bridge , PWM output compatible pin
One wire : 18b20 , DHT11 compatible pin
Peripheral : SPI , I2C , USART

Cost : 55000 (MM)Kyat

DMIA Company also installed in railway locomotives

August 20, 2021August 20, 2021 admin

MICRO MKT CO., LTD PRODUCED FROM

DEAD MAN AND WHEEL SLIP DEVICE MALAYSIA’S SETUP USED AT DMIA COMPANY TRAIN LOCOMOTIVES

Malaysia used DMIA Company also installed in railway locomotives

GP Current – 2000 AMP
GP Separate Voltage – 100 V
GP Seprate Current – 100 A
Alternator Voltage – 400 V
Alternator Current – 25 A
Battery Voltage – 100 V
Battery Current – 50 A
GP Shunt Volt – 100 V
GP Shunt Current – 25 A
Output KW – (GP Voltage x GP Current)
Engine R.P.M – 3000
Presentation

The technical manual concerns the one of the Load Test Bench. This Product is designed to operate on the voltage and current input via from Hall-Effect Sensor Modules, Industry PC, Communicate to Serial RS-232, Display Metering are
1. GP Current
2. GP Volt
3. GP Separate Volt
4. GP Separate Current
5. Alternator Volt
6. Alternator Current
7. Battery Voltage
8. Battery Current
9. GP Shunt Volt
10. GP Shunt Current
11. Output KW

4 – Data Logging Mode

File System = Microsoft Access File
Logging Format = Push Button on Touch Screen or Mouse Click to save current data
Printing = Yes
Data Base = Standard Load Test Character for Each Locomotive Type